Description
Experience both short cycle times and ultra-low carryover with our fast and efficient SIL-40C XS autosampler, with a UHPLC pressure tolerance of 105 MPa (1050 bar). This model is equipped with a forced air sample cooling mechanism to protect heat-sensitive samples. Its new design utilizes precise, high-speed injection to increase sample throughput and productivity. Sample capacity can be expanded by adding up to three temperature-controlled plate changers. Minimal carryover combined with the precision of a metering pump for sample draw improves your UHPLC experience.
- Needle-in-the-flow-path design minimizes carryover
- Standard sample loop (50 µL), an optional sample loop (2000 µL) and a fixed-loop configuration (5 or 20 µL) are available.
- Total injection method: 0.1 to 50 µL in increments of 0.1 µL from 0.1 to 9.9 µL, and 1 µL from 10-50 µL.
- Performs sample pretreatment including dilution, reagent addition, co-injection of samples, stacked injection, and overlapped injection.
- Temperature control from 4 to 45°C (± 2°C accuracy,) with a forced air cooling mechanism to reduce condensation.
- Industry-leading cycle time of < 7 seconds.
- Carryover performance: 0.0015% (no needle rinsing) and 0.0003% (with rinse).
- Equipped with both a static rinse port and an active rinse pump to rinse the outside of the needle before and/or after aspirating sample.
- A dual injection mechanism can be installed for high throughput operation or complementary analysis.